pyanaconda.ui.tui.spokes package¶

Submodules¶

pyanaconda.ui.tui.spokes.askvnc module¶

class pyanaconda.ui.tui.spokes.askvnc.AskVNCSpoke(app, data, storage=None, payload=None, instclass=None, message=None)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

apply()¶

indirect¶

input(args, key)¶: Override input so that we can launch the VNC password spoke

refresh(args=None)¶

title = 'VNC'¶

class pyanaconda.ui.tui.spokes.askvnc.VNCPassSpoke(app, data, storage, payload, instclass, message=None)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

apply()¶

completed¶

indirect¶

prompt(args=None)¶: Override prompt as password typing is special.

refresh(args=None)¶

title = 'VNC Password'¶

pyanaconda.ui.tui.spokes.askvnc.exception_msg_handler_and_exit(event, data)¶: Display an exception and exit so that we don’t end up in a loop.

pyanaconda.ui.tui.spokes.langsupport module¶

class pyanaconda.ui.tui.spokes.langsupport.LangSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.common.FirstbootSpokeMixIn, pyanaconda.ui.tui.spokes.NormalTUISpoke

This spoke allows a user to select their installed language. Note that this does not affect the display of the installer, it only will affect the system post-install, because it’s too much of a pain to make other languages work in text-mode.

Also this doesn’t allow for selection of multiple languages like in the GUI.

apply()¶: Store the selected langsupport locales

category¶: alias of LocalizationCategory

completed¶

input(args, key)¶: Handle user input.

mandatory¶

prompt(args=None)¶: Override default prompt with a custom prompt.

refresh(args=None)¶: args is None if we want a list of languages; or, it is a list of all locales for a language.

status¶

title = 'Language settings'¶

pyanaconda.ui.tui.spokes.network module¶

class pyanaconda.ui.tui.spokes.network.NetworkSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.EditTUISpoke

Spoke used to configure network settings.

apply()¶: Apply all of our settings.

category¶: alias of SystemCategory

completed¶: Check whether this spoke is complete or not. Do an additional check if we’re installing from CD/DVD, since a network connection should not be required in this case.

initialize()¶

input(args, key)¶: Handle the input.

mandatory¶: This spoke should only be necessary if we’re using an installation source that requires a network connection.

refresh(args=None)¶: Refresh screen.

status¶: Short msg telling what devices are active.

title = 'Network configuration'¶

pyanaconda.ui.tui.spokes.password module¶

class pyanaconda.ui.tui.spokes.password.PasswordSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.common.FirstbootSpokeMixIn, pyanaconda.ui.tui.spokes.EditTUIDialog

apply()¶

category¶: alias of UserSettingsCategory

completed¶

mandatory¶

prompt(args=None)¶: Overriden prompt as password typing is special.

refresh(args=None)¶

showable¶

status¶

title = 'Root password'¶

pyanaconda.ui.tui.spokes.progress module¶

class pyanaconda.ui.tui.spokes.progress.ProgressSpoke(app, ksdata, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.StandaloneTUISpoke

apply()¶

completed¶

input(args, key)¶

postForHub¶: alias of SummaryHub

priority = 0¶

prompt(args=None)¶

refresh(args=None)¶

title = 'Progress'¶

pyanaconda.ui.tui.spokes.shell_spoke module¶

Text mode shell spoke

class pyanaconda.ui.tui.spokes.shell_spoke.ShellSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

apply()¶

category¶: alias of SystemCategory

completed¶

prompt(args=None)¶

refresh(args=None)¶

classmethod should_run(environment, data)¶

status¶

title = 'Shell'¶

pyanaconda.ui.tui.spokes.software module¶

class pyanaconda.ui.tui.spokes.software.SoftwareSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

Spoke used to read new value of text to represent source repo.

apply()¶: Apply our selections

category¶: alias of SoftwareCategory

checkSoftwareSelection()¶: Depsolving

completed¶

Make sure our threads are done running and vars are set.

WARNING: This can be called before the spoke is finished initializing if the spoke starts a thread. It should make sure it doesn’t access things until they are completely setup.

initialize()¶

input(args, key)¶: Handle the input; this chooses the desktop environment.

ready¶: If we’re ready to move on.

refresh(args=None)¶: Refresh screen.

showable¶

status¶: Where we are in the process

title = 'Software selection'¶

txid_valid¶: Whether we have a valid yum tx id.

pyanaconda.ui.tui.spokes.source module¶

class pyanaconda.ui.tui.spokes.source.SourceSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.EditTUISpoke, pyanaconda.ui.helpers.SourceSwitchHandler

Spoke used to customize the install source repo.

apply()¶: Execute the selections made.

category¶: alias of SoftwareCategory

completed¶

initialize()¶

input(args, key)¶: Handle the input; this decides the repo source.

ready¶: Check if the spoke is ready.

refresh(args=None)¶

showable¶

status¶

title = 'Installation source'¶

pyanaconda.ui.tui.spokes.storage module¶

class pyanaconda.ui.tui.spokes.storage.StorageSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

Storage spoke where users proceed to customize storage features such as disk selection, partitioning, and fs type.

apply()¶

category¶: alias of SystemCategory

completed¶

execute()¶

initialize()¶

input(args, key)¶: Grab the disk choice and update things

mandatory¶

ready¶

refresh(args=None)¶

run_dasdfmt(to_format)¶: This generates the list of DASDs requiring dasdfmt and runs dasdfmt against them.

showable¶

status¶: A short string describing the current status of storage setup.

title = 'Installation Destination'¶

class pyanaconda.ui.tui.spokes.storage.AutoPartSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

Autopartitioning options are presented here.

apply()¶

category¶: alias of SystemCategory

indirect¶

input(args, key)¶: Grab the choice and update things

refresh(args=None)¶

title = 'Autopartitioning Options'¶

pyanaconda.ui.tui.spokes.time_spoke module¶

class pyanaconda.ui.tui.spokes.time_spoke.TimeZoneSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.common.FirstbootSpokeMixIn, pyanaconda.ui.tui.spokes.NormalTUISpoke

apply()¶

category¶: alias of LocalizationCategory

completed¶

initialize()¶

input(args, key)¶

mandatory¶

prompt(args=None)¶

refresh(args=None)¶: args is None if we want a list of zones or “zone” to show all timezones in that zone.

status¶

title = 'Timezone settings'¶

pyanaconda.ui.tui.spokes.user module¶

class pyanaconda.ui.tui.spokes.user.UserSpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.common.FirstbootSpokeMixIn, pyanaconda.ui.tui.spokes.EditTUISpoke

apply()¶

category¶: alias of UserSettingsCategory

completed¶: Verify a user is created; verify pw is set if option checked.

edit_fields = [EditTUISpokeEntry(title='Create user', attribute='_create', aux='check', visible=True), EditTUISpokeEntry(title='Fullname', attribute='gecos', aux=<_sre.SRE_Pattern object at 0x7f6212b38a48>, visible=<function <lambda> at 0x7f61f452b0c8>), EditTUISpokeEntry(title='Username', attribute='name', aux=<_sre.SRE_Pattern object at 0x14ee890>, visible=<function <lambda> at 0x7f61f452b410>), EditTUISpokeEntry(title='Use password', attribute='_use_password', aux='check', visible=<function <lambda> at 0x7f61f452be60>), EditTUISpokeEntry(title='Password', attribute='_password', aux=<_sre.SRE_Pattern object at 0x7f61feabc648>, visible=<function <lambda> at 0x7f61f452bed8>), EditTUISpokeEntry(title='Administrator', attribute='_admin', aux='check', visible=<function <lambda> at 0x7f61f452bf50>), EditTUISpokeEntry(title='Groups', attribute='_groups', aux=<_sre.SRE_Pattern object at 0x14ef1f0>, visible=<function <lambda> at 0x7f61f4508050>)]¶

mandatory¶: Only mandatory if the root pw hasn’t been set in the UI eg. not mandatory if the root account was locked in a kickstart

refresh(args=None)¶

classmethod should_run(environment, data)¶

showable¶

status¶

title = 'User creation'¶

pyanaconda.ui.tui.spokes.warnings module¶

class pyanaconda.ui.tui.spokes.warnings.WarningsSpoke(*args, **kwargs)¶

Bases: pyanaconda.ui.tui.spokes.StandaloneTUISpoke

apply()¶

completed¶

preForHub¶: alias of SummaryHub

priority = 0¶

refresh(args=None)¶

title = 'Warnings'¶

Module contents¶

class pyanaconda.ui.tui.spokes.TUISpoke(app, data, storage, payload, instclass)¶

Bases: pyanaconda.ui.tui.tuiobject.TUIObject, pyanaconda.ui.tui.simpleline.base.Widget, pyanaconda.ui.common.Spoke

Base TUI Spoke class implementing the pyanaconda.ui.common.Spoke API. It also acts as a Widget so we can easily add it to Hub, where is shows as a summary box with title, description and completed checkbox.

Parameters:	title (unicode) – title of this spoke category (string) – category this spoke belongs to

completed¶

input(args, key)¶: Handle the input, the base class just forwards it to the App level.

refresh(args=None)¶

render(width)¶: Render the summary representation for Hub to internal buffer.

status¶

title = 'Default spoke title'¶

class pyanaconda.ui.tui.spokes.EditTUISpoke(app, data, storage, payload, instclass, policy_name='')¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

Spoke with declarative semantics, it contains a list of titles, attribute names and regexps that specify the fields of an object the user allowed to edit.

CHECK = 'check'¶

PASSWORD = <_sre.SRE_Pattern object at 0x7f61feabc648>¶

edit_data = ''¶

edit_fields = []¶

input(args, key)¶

refresh(args=None)¶

visible_fields¶: Get the list of currently visible entries

class pyanaconda.ui.tui.spokes.EditTUIDialog(app, data, storage, payload, instclass, policy_name='')¶

Bases: pyanaconda.ui.tui.spokes.NormalTUISpoke

Spoke/dialog used to read new value of textual or password data

PASSWORD = <_sre.SRE_Pattern object at 0x7f61feabc648>¶

input(entry, key)¶

prompt(entry=None)¶

refresh(args=None)¶

title = 'New value'¶

class pyanaconda.ui.tui.spokes.EditTUISpokeEntry¶

Bases: tuple

EditTUISpokeEntry(title, attribute, aux, visible)

attribute¶: Alias for field number 1

aux¶: Alias for field number 2

title¶: Alias for field number 0

visible¶: Alias for field number 3

class pyanaconda.ui.tui.spokes.StandaloneSpoke(storage, payload, instclass)¶

Bases: pyanaconda.ui.common.Spoke

A StandaloneSpoke is a Spoke subclass that is displayed apart from any Hub. It is suitable to be used as a Welcome screen.

From a layout perspective, a StandaloneSpoke provides a full screen interface. However, it also provides navigation information at the top and bottom of the screen that makes it look like the StandaloneSpoke fits into some other UI element.

Class attributes:

preForHub/postForHub – A reference to a Hub subclass this Spoke is: either a pre or post action for. Only one of these may be set at a time. Note that all post actions will be run for one hub before any pre actions for the next.
priority – This value is used to sort pre and post: actions. The lower a value, the earlier it will be run. So a value of 0 for a post action ensures it will run immediately after a Hub, while a value of 0 for a pre actions means it will run as the first thing.

Create a StandaloneSpoke instance.

postForHub = None¶

preForHub = None¶

status¶

class pyanaconda.ui.tui.spokes.NormalTUISpoke(app, data, storage, payload, instclass)¶: Bases: pyanaconda.ui.tui.spokes.TUISpoke, pyanaconda.ui.common.NormalSpoke